Plumbing, heating & drainage in London

What needs
fixing today?

Tell us what’s happening at home. Choose the closest match to find the right service.

  • See which pipes or fittings may be involved.
  • Choose a repair or installation.
  • Share your postcode and how urgent the job is.
Call 020 3936 0429
Cold supply
Stop tapSupply pipeOutlet
Hot water
BoilerHot pipeHot tap
Drainage
Sink trapWaste pipeDrain
New fitting
SupplyConnectionNew fitting

Plumbing Command Centre

Cutaway showing a boiler and bathroom above a kitchen and utility room, with pipework between floors.Cold water supply

Tell us where you first saw water and whether it’s still spreading.

Plan your visit

Plumbers in London

A wet patch under the sink can come from a tap, a supply pipe or the waste fitting. At Fanatic Plumbers, we start by asking when the water appears. If the cupboard stays dry until you empty the sink, that gives our plumber a different place to start looking.

We also help London households with heating faults and blocked drains. If the boiler is running but the shower stays cold, tell us whether the kitchen tap gets hot. If water backs up in the bath when the washing machine drains, mention both. Those details help us decide what to check on arrival.

Planning a new fitting? We can fit taps, radiators and kitchen appliances. Tell us what you want to replace and whether you already have the new part. We check the connections and available space, explain any changes the pipework needs and agree the work with you before we start.

Before we leave, we test the fitting with you. After a sink repair, for example, we fill the basin, let the water out and check the joints underneath while it drains. We show you where the leak was and explain what to look for if you notice water there again.

Call 020 3936 0429 with your postcode and a short description of the job. If the stop tap is in a shared cupboard or a concierge holds the keys, let us know so we can plan access for your visit.

Choose a plumbing problem
Inside the home

Explore the house.

Choose a room or fitting to find help with a plumbing problem.

Two-storey cutaway with bathroom fittings upstairs, kitchen and boiler downstairs, and drainage below the floor.
Selected area

Kitchen

What are you noticing?

A drip from the spout and water around the base point to different parts of the fitting. Tell us where you first see water.

Tap repair →

A visit can cover the inlet, waste connection and a test cycle. Mention whether the machine is integrated.

Dishwasher installation →
Request a visit →
Selected area

Bathroom

What are you noticing?

The position of the soil stack and the depth available under the floor help determine where fittings can go.

Bathroom installation →

Describe which control sticks and whether the problem affects hot, cold or both. A photograph helps identify the fitting.

Tap repair →
Request a visit →
Selected area

Boiler / heating

What are you noticing?

Tell us whether every hot tap is affected and whether the radiators still warm up. These observations help narrow the checks on arrival.

Boiler repair →

Note which radiator is affected and whether its pipes warm up when the heating runs.

Radiator repair →
Request a visit →
Selected area

Pipes / water supply

What are you noticing?

Describe where the water appears and whether it is still flowing. Call to discuss an active escape of water.

Emergency plumbing →

A plumber can compare the flow at other outlets before inspecting the affected tap and its local supply.

Tap repair →
Request a visit →
Selected area

Drainage

What are you noticing?

Say which fittings are affected and whether using one causes water to rise in another.

Drain clearance →

Where access allows, a camera survey can record the condition of a cleared drain and locate persistent obstructions.

CCTV drain survey →
Request a visit →
Selected area

Toilet

What are you noticing?

Avoid flushing again while the bowl is high. Mention whether nearby sinks still empty normally.

Blocked toilets →

Tell us whether water appears after a flush or builds up while the toilet is idle.

Toilet leak repair →
Request a visit →
Selected area

Shower

What are you noticing?

Note whether it appears during use or afterwards. The waste, seals and supply connections may need separate checks.

Shower leak repair →

Describe how quickly the tray empties after the shower stops and whether the basin drains slowly too.

Drain clearance →
Request a visit →

What should I photograph?

Choose what you’re calling about. Two photos can help us understand the job. You can also call straight away.

Show the whole fitting

Step back so we can see the sink, cupboard or nearby pipes.

Call 020 3936 0429 Send an enquiry
Kitchen sink and mixer tap
Example photo
Service coverage

Fanatic London Live Map

Find a plumber near you. Choose an area to see the work we do there, or check a postcode before you call.

Greater London boroughs and the River Thames
Service centresIllustrated connections

Contains OS data © Crown copyright and database right 2026. Contains National Statistics and Ordnance Survey data © Crown copyright and database right 2015. Borough boundaries · River Thames.

Pricing guide

Know what to ask
before you book.

Time on site, parts and getting to the fault can all affect the cost. Ask what is included, whether VAT applies and if there is a minimum charge.

Labour

Ask how the first visit is charged and how further time is billed. For a concealed leak, finding the source can be a separate task from fixing it. Ask whether the visit covers both and what happens if the water has to stay off while a part is ordered.

Parts

A replacement washer and a manufacturer-specific cartridge are different jobs. Send the model number or a photo of any identifying marks. If you’ve already bought a fitting, confirm that it is suitable and agree who supplies any valves, seals or connectors.

Additional work

Discuss access and reinstatement before a panel, tile or floor covering is lifted. A CCTV drain survey, jetting or a return appointment can change the cost. Ask for separate figures for any work that only becomes necessary after diagnosis.

What might my job cost?

Select a job to see its London guide price. Call for a quote for your address.

Annual boiler service£128
London guide price

Annual boiler service

£128

A routine check of your boiler.

If the engineer finds a fault, ask for a separate repair quote.

Call 020 3936 0429 for a quote
Landlord gas safety certificate£121–£124
London guide price

Landlord gas safety certificate

£121–£124

A gas safety check for the appliances at your rental property.

Tell us which gas appliances need checking when you call.

Call 020 3936 0429 for a quote
Service and landlord gas safety certificate£216
London guide price

Service and landlord gas safety certificate

£216

A boiler service and a landlord gas safety check in one visit.

Boiler service + gas safety check

Tell us the boiler model and which other gas appliances need checking.

Call 020 3936 0429 for a quote
Standard drain unblocking£75–£300
London guide price

Standard drain unblocking

£75–£300

Clearing a blocked drain.

Access, the blockage location and the equipment needed can affect the quote.

Call 020 3936 0429 for a quote
Under the kitchen sink3D view

Where can you see water?

Choose the spot closest to the leak. We’ll help you describe it when you call.

Under the tap

Is the underside of the worktop wet just below the tap? Tell us whether water appears while the tap runs or keeps appearing after you turn it off.

Call 020 3936 0429
Pipework explained

Follow the water.

Choose a circuit and press Play flow to follow the water. Drag the slider to explore each stage.

BoilerKitchen sinkBathroomToiletRadiatorMain supplyStopcockDrain
Cold supply

Low flow at several taps

Main supply · stopcock · cold outlets

What we check

A plumber compares flow at more than one outlet, checks accessible valves and establishes whether the restriction affects the whole property. Does the kitchen tap slow to a trickle when the shower is running? Tell us which taps are affected and whether the flow returns when the shower stops. That helps us narrow down where to test.

Discuss a supply problem →
Hot water

No hot water

Combi boiler · kitchen sink · bathroom basin

What we check

The engineer compares the hot outlets and checks whether the boiler responds to demand. Working central heating is a useful detail to mention. If the basin tap runs hot but the shower stays lukewarm, mention that when you call. We can start at the shower fitting. If every hot tap runs cold, we start by checking what happens when the boiler is asked for hot water.

Boiler repair →
Heating

Radiators stay cold

Boiler · heating flow · radiator · return

What we check

The engineer checks the heating controls and compares flow and return temperatures. One cold radiator calls for different checks from a whole cold circuit. Tell us which rooms warm up first and which stay cold, even after the heating has been on for a while. If the problem began just after a radiator was replaced, let us know which one so we can check that part of the circuit.

Central heating repair →
Waste & drainage

Water backs up

Fixture traps · branch wastes · soil stack · drain

What we check

A plumber checks which fixtures back up and where the pipework can be accessed before deciding how to clear the obstruction. If the bath gurgles when the washing machine empties, tell us about both fixtures. They may share a waste pipe. Knowing which outlet backs up first helps us choose an access point and check that the water drains away after clearance.

Drain clearance →
How a visit works

Find the cause.
Check the repair.

A useful first call tells us where to start. At the property we investigate the symptoms, discuss the options and check the agreed work.

01Before we visitTell us what’s happening

Give us the full postcode and describe what you can see or hear. When did it start? Does it happen every time? Is one fixture affected or several? If you send a photo, include a wider view so we can see what surrounds the fitting.

Let us know if the property is rented or managed, if a concierge holds the keys, and who can authorise extra work. For a communal cupboard or shared valve, arrange access with the person responsible before the appointment.

Plumbing tools set out before a visit
02At the propertyFind the cause

We start where the symptoms point. A damp cupboard could come from a pressurised connection or from a waste pipe that only leaks during use. A slow basin can be a local blockage, whereas a gurgle in another room can suggest a fault further along the drain.

We look at accessible fittings and test what we can safely operate. If more investigation is needed, we explain what we need to reach and why. We also tell you if getting to the fault involves opening a panel, moving an appliance or accessing an adjoining property.

A pressure gauge used during plumbing diagnostics
03After agreementRepair and check

Once you agree to the work, we repair or replace the faulty part where practical. If the correct component needs ordering or the first visit is limited to stopping a leak, we explain what still needs doing.

Where the system can be used safely, we run the affected fitting or check the repair under normal operation. That could mean watching a waste joint as water drains, checking a tap through several uses or checking the repaired connection for signs of leakage.

A finished shower fitting being checked
Before we arrive

Three things worth checking.

When you contact a plumbing company in London, give the full postcode and explain how to reach the fault. These details matter most when the fitting is concealed or other people share the building.

A drop of water hangs from a kitchen tap.

Know which fitting started it.

Write down what you were doing when you first saw the leak or heard a noise. If the problem only happens when you flush the toilet, empty a bath or run a washing machine, that’s useful. If you have stopped using the fixture because water is escaping, tell us when you call.

Open cupboard doors reveal the sink trap and supply pipes.

Get the right access.

Clear the cupboard or the floor immediately around the fixture if you can do so safely. For a boiler in a locked cupboard, a stop tap shared by several flats or a drain chamber behind a gate, arrange access with the person who holds the keys.

A resident discusses a repair estimate over the phone.

Agree who can make decisions.

In a rented or managed property, find out who will be available to approve work if the repair turns out to be different from what you expected. Make sure we have a contact number for the person who can authorise the change.

Common questions

Before you call.

Call 020 3936 0429
What should I do about an active leak?

If water is still escaping and you can safely identify and reach your own stop tap, turn off the supply and call us. Tell us if you have managed or shared water controls. If you can contain the leak, tell us how often it happens and whether a tap, shower, toilet or appliance sets it off.

Leak
Tell us where the water first appeared and whether it is still spreading.
Can you diagnose a boiler fault from a photo?

A photo of the display, together with the boiler model, helps us prepare for a visit. Tell us if the problem is intermittent and whether the radiators or hot taps are affected. An on-site check is usually needed to establish the cause and determine which part, if any, needs replacing.

DisplayModel label
Take a photo of the display and model label if they are visible.
Why do several drains back up at the same time?

A slow basin on its own can be a local issue. If several outlets back up, the blockage may be further along the drainage system. Check whether other flats or neighbours are affected and share what you find. Shared or public sewers may be the water company’s responsibility.

Shared drain
Tell us which fixtures back up together.
Can I provide my own taps or fittings?

Tell us the model and send the fitting instructions or dimensions before you order. We need to check that it fits your existing pipework, that there is room to connect it and that any isolating valves can be reached. Ask whether removal and disposal of the old fitting are included.

Mounting hole
Send the tap model and a photo of the existing mounting holes.
What should I ask before accepting an estimate?

Ask what the labour charge covers, whether the minimum period includes diagnosis, how parts are priced and whether VAT is included. If we cannot see the pipe or fix the issue in a first visit, discuss how further investigation and any return visit will be charged.

EstimateLabourPartsVAT
Check what the quote includes for labour, parts and VAT.
How do I book work in a rented or managed property?

Agree with your landlord or managing agent who will instruct us and approve any further work. Give us a contact for access if keys, shared cupboards or restricted working hours are involved. We can use those details to discuss the visit with the right person.

Visit detailsAddressAccessApproval
Have the property address and the details of whoever approves repairs ready.

Customer reviews

Fanatic Plumbers’ company-wide rating

5.0/5
69 Customer Reviews

Ready to arrange a visit?

Tell us your postcode and what’s happening. We’ll discuss the next step.